Suitable for coloured paint coatings on interior walls and ceilings, subjected to higher mechanical loads. Serves as a similarly tinted protective finish for all matt (flat), intensively tinted interior Caparol paints. PremiumColor produces a noble matt surface with special colour brilliance and enhances the writing resistance (finish), if the material is tinted in strong colours.

• Water-dilutable, ecologically compatible, low odour.
• Very easy to touch up.
• Emission-minimised and solvent-free.
• Enhances the writing resistance (finish).
• Highly tough surface.
• Intensive colour brilliance.
• Easy to apply.
• Resistant to aqueous disinfectants and detergents.

Synthetic resin dispersion/emulsion according to German standard DIN 55945.

PremiumColor is only available as basis material and has to be tinted in the desired colour shade via the ColorExpress tinting & mixing machine system (can only be applied in tinted form).
Quantities of 100 litres or more in individual colours may be ordered ready-tinted ex works.
Check tinted product before applying to avoid colour deviation. Always use tinted paint of same batch, when applying on seamless surfaces.

If colour shades with a lower opacity (hiding/covering power) are used, e.g. red, orange or yellow, it is advisable to apply one priming coat of Caparol-Haftgrund, tinted in a matching priming system colour, available via ColorExpress.

Dull matt (Dead-matt according to DIN EN 13 300)

Characteristics according to DIN EN 13 300:
Tinting may cause variations.

Wet abrasion

Wet scrub resistance Class 1, corresponds to
"scrub resistant" as per DIN 53778

Maximum particle (grit) size

Fine (< 100 µm)

Density

Approx. 1.1 g/cm³

Suitability according to Technical Information No. 606 Definition of Application Areas