Suitable for colourful designing as well as moisture and UV protection of dimensionally stable wooden parts, e.g. windows and doors, or components with limited dimensional stability, such as panelling with tongue and groove, shutters, gates, framework construction, etc. Also suitable for wooden parts of unstable shape, e.g. panelling, fences, shingles, balustrades, shuttering, pergolas, etc. Only suitable for exterior use. The product is provided with a preservative against deterioration in the coating film due to fungal (fungi/mildew/mould) attacks.

Note: The film protection agent can only temporarily counteract the forming of fungal growth (attack). On surfaces subjected to extreme loads, the fungal attack may occur prematurely. The product cannot fight the cause of the fungal attack. The efficiency cannot be projected because it is highly dependent on existing biological conditions on-site.

This wood stain is unsuitable for use on wooden parts in direct contact with soil. Exterior doors and windows may be treated on all sides with the product. Capadur UniversalLasur is a decorative translucent finish and has a protective effect against moisture (humidity) and UV radiation. Follow BFS Data Sheet No. 18, section 2.2.3 et seq. for coating boards of derived timber products, e.g. wood plates, veneer plywood.

• Suitable for use on wood
• Thin-film/-layered
• Open-pored
• Highly diffusion-capable
• High protection against UV rays
• Water-repellent due to hydro-pearl effect
• Film protection to counteract the fungal attack
• Highly weatherproof
• Thixotrope, low-dripping viscosity
• Easy to apply
• Easy to renovate

Alkyd resin with non-aromatic solvents

• Standard: 375 ml, 750 ml, 2,5 Ltr., 5 Ltr.
• ColorExpress: 375 ml, 750 ml, 2,5 Ltr., 5 Ltr.

Pine, Oak (light-colored), Walnut, Nut Tree, Palisander (Rosewood), Teak, Mahogany, Ebony, Transparent, and a nearly opaque renovation shade for wood grain technique. All color shades can be blended in any mixture ratio.
Tinting via ColorExpress stations (Capalac mix) in special colors of the Caparol 3D System PLUS color card and in many color shades of other color collections. The tinting base is the color shade "Transparent".

Note: Some tints are only limitedly suitable for exterior use. Detailed information is available at ColorExpress stations. Use transparent products only for priming coats (equalizing the absorbency of wooden substrates) before applying pigmented coats of wood stain, otherwise, sufficient protection of wood from UV rays cannot be guaranteed.

semi-gloss
The gloss level may vary depending on the wooden substrate.

Keep in a cool, but frost-free place, in tightly closed packaging.

• Density: Approx. 0.9 g/cm3