Products

Latex Gloss 60

The Gloss Paint. Wet scrub resistance: Class 1


Field of Application

For glossy, heavy-duty interior paint coatings on surfaces stressed by contact or subjected to high soiling. Perfectly suitable for coatings on Capaver glass fabric wall coverings to accentuate the textile textures.

Material Properties

  • Emission-minimised, solvent-free, unplasticized.
  • Free of fogging-active substances.
  • Water-dilutable, ecologically compatible, low odour.
  • Diffusion-capable.
  • sd-value < 0.5 m
  • Maintains the texture of substrate.
  • High opacity.
  • High degree of whiteness.
  • Stable gloss, non-yellowing.
  • Excellently cleanable and resistant to aqueous disinfectants and household cleaning agents.
  • Easy to apply.

Material Base / Vehicle

Synthetic latex according to German standard DIN 55945.

Packaging/Package Size

  • Standard Product: 2.5 litres and 12.5 litres
  • ColorExpress: 5 litres,12.5 litres

Colours

White.

Latex Gloss 60 can be tinted with CaparolColor or AmphiColor® (AVA) colourants. If more than one bucket/container is manually tinted, all product must be thoroughly mixed before use in order to avoid colour differences. Quantities of 100 litres or more in individual colour shades may be ordered ready-tinted ex factory.

Latex Gloss 60 is tintable to all current colour collections via the ColorExpress tinting & mixing machine system, up to luminosity/lightness index (LI) approx. 70. Check tinted product before applying to avoid colour differences. Always use tinted paint of same batch, when applying on seamless surfaces. 
Brilliant, intensive colour shades may have a lower opacity (hiding/covering power). It is therefore recommended to apply a first coat in a similar hiding pastel tint, based on white. A second finishing coat may be necessary.

Gloss Level

Gloss (according to DIN EN 13 300)

Storage

Keep in a cool, but frost-free place.

Technical Data

Characteristics according to DIN EN 13 300: Tinting may cause variations.

Wet abrasion

Wet scrub resistance Class 1, corresponds to "scrub resistant" as per German standard DIN 53778

Contrast ratio

Opacity Class 2, with a spreading rate of 7 m2/l or 140 ml/m2

Maximum particle (grit) size

Fine (< 100 µm)

Density

Approx. 1.3 g/cm3

Suitability according to Technical Information No. 606 Definition of Application Areas

Interior 1Interior 2Interior 3Exterior 1Exterior 2
+++
(–) inapplicable / (○) of limited suitability / (+) suitable