Suitable for high-grade, wash-resistant paint coatings on interior surfaces at risk of being attacked by mildew/mould. For supporting the room hygiene in private living areas.

• Solvent-free.
• Water-dilutable, low odour.
• Diffusion-capable.
• s_d-value < 0.1 m
• Film-preserved for protection against fungicidal and bactericidal attack.

Synthetic resin dispersion/emulsion according to German standard DIN 55945

2.5 l, 12.5 l

White.
Malerit-W can be tinted to a max. of 5 % with CaparolColor or AmphiColor^® (AVA) colourants. If more than one bucket is manually tinted, all product must be thoroughly mixed before use in order to avoid colour differences.
Malerit-W is tintable to all current colour collections via the ColorExpress tinting & mixing machine system, in light/bright colours to luminosity/lightness index (LI) approx. 70. Quantities of 100 litres or more in individual colours may be ordered ready-tinted ex factory. Check tinted paint before applying to avoid colour differences. Always use tinted product of same batch, when applying on seamless surfaces.

Dull matt (Dead-matt according to DIN EN 13 300)

Keep in a cool, but frost-free place.

Characteristics according to DIN EN 13 300: Tinting may cause variations.

Wet abrasion

Wet scrub resistance Class 3, corresponds to "wash-resistant" as per German standard DIN 53 778

Contrast ratio

Opacity (hiding power) Class 2, with a spreading rate of 7 m²/l or 140 ml/m²

Maximum particle (grit) size

Fine (< 100 µm)

Density

Approx. 1.5 g/cm³