Products

Indeko-plus

A class of its own, extremely yielding and economic. Emission-minimised, unplasticized and solvent-free.


Field of Application

Top-quality coating for all internal walls and ceilings. Indeko-plus has double covering power, hence in most cases one evenly applied coat is sufficient. The product dries very fast without emitting any offensive odour and is therefore particularly suitable when time is pressing and occupants or users are not to be incommoded by the smell of fresh paint, e.g. painting or redecoration in hospitals, nursing homes, warehouses, hotels, restaurants, offices, schools, playschools, surgeries, public buildings and private living quarters.

Material Properties

  • Water-thinnable, ecologically compatible, low odour.
  • Free of fogging-active substances.
  • Easy to touch up.
  • Double covering power.
  • High degree of whiteness.
  • Slightly filling, non-yellowing.
  • Diffusion-capable, sd-value < 0.1 m

Material Base / Vehicle

Synthetic resin dispersion/emulsion according to German standard DIN 55945.

Packaging/Package Size

  • Standard Product: 2.5 l, 5 l, 10 l and 12.5 litres

  • ColorExpress: 1.25 l, 2.5 l, 5 l, 7.5 l and 12.5 litres

Colours

White. Indeko-plus is tintable with CaparolColor or AmphiColor® colourants. If more than one bucket is manually tinted, all product must be thoroughly mixed before use in order to avoid colour differences.
Quantities of 100 litres or more in individual colour shades may be ordered ready tinted ex factory.
Indeko-plus (Base 1-3) can be tinted via the ColorExpress tinting & mixing machine system according to all current colour collections. Check tinted product before applying in order to avoid colour differences.
Always use tinted paint of same batch, when applying on seamless surfaces.
When colour shades with a lower opacity (hiding/covering power) are used, e.g. red, orange or yellow, it is advisable to apply a first (priming) coat of Indeko-plus or Caparol-Haftgrund, tinted in a matching priming system colour, available via ColorExpress. Possibly a second finishing coat may be necessary.

Gloss Level

Dull matt (Dead-matt according to DIN EN 13300)

Storage

Keep in a cool, but frost-free place.

Technical Data

Characteristics according to DIN EN 13 300: Tinting may cause variations.

Wet abrasion

Wet scrub resistance class 1, corresponds to "scrub resistant" according to German standard DIN 53778

Contrast ratio

Opacity/covering power class 1, with a spreading rate of 8 m2/l or 125 ml/m2

Maximum particle (grit) size

Fine (< 100 µm)

Density

Approx. 1.4 g/cm³