ThermoSan NQG is suitable for common ETICS finishing coatings such as synthetic resin, silicone resin, lime and lime-cement plasters. Can be used on mineral and dispersion-bound plasters, coated or uncoated.

• Dirt-repellent thanks to the nano-quartz grid
• Highest color stability
• Maximum protection against algae and fungal attack
• Highly CO2 permeable
• Micro-porous (non-film-forming)

Combined silicone resin emulsion and innovative type of hybrid binder on an inorganic/organic basis.

Standard product: 12.5 litres
ColorExpress: 1.25 litres, 7.5 litres and 12.5 litres

Other colors can be tinted via ColorExpress. When purchasing 100 liters and more in one color and order, also available tinted at the factory on request. In order to identify possible tinting errors, please check the color shade accuracy before processing. Only use shades of one production (batch) on contiguous surfaces. ThermoSan NQG can also be tinted with suitable AmphiColor-Volltonfarbe tinting colors with an additional amount of a maximum of 20%. In the case of self-tinting, mix the required total amount with each other in order to avoid color differences. Intense color tones may have lower hiding power. It is therefore advisable to prepaint a comparable, opaque, white-based, pastel color for these colors. A second top coat may be necessary.

Color resistance according to German BFS*-Merkblatt (Data Sheet) No. 26:
Class: A (binder)
Group: 1 (pigmentation)

Matt G3

Please store in a cool place and keep the container tightly closed.

• Maximum particle (grit) size: < 100 μm, S1
• Density: Approx. 1.5 g/cm3
• Dry film thickness: 100 - 200 μm, E3
• Water permeability (w-value): < 0.1 [kg/(m2 · h0.5)] (low), W3
• Water vapour permeability (sd-value): < 0.14 m (high), V1