The special silicone resin/binder combination provides water-repellent, highly vapour permeable
paint coatings on exterior renders and mineral substrates. Also suitable for renovation of
adherent silicate paints, matt dispersion/emulsion paints or synthetic renders and stable
external thermal insulation composite systems (ETICS/EWI).
AmphiSilan-plus combines the advantages of approved emulsion paints and classic silicate
paints. These properties make AmphiSilan-plus an ideal choice for coatings on listed buildings
and lime plasters. A new binder and a filler combination of a facade of cleanliness.

• no thermo-plasticity

• Low surface tension

• non-film-forming

• micro-porous

• Permeable to CO2

• Resistant to aggressive air pollutants

• Water repellent

• Good covering power

• Reduces tendency of facades to dirt

silicone resin emulsion

2.5 l, 10 l

White (base 1 )

Transparent ( base 2 and 3) only for tinting .

The paint AmphiSilan Plus base 1 can be colored using dyes alone AVA - Amphibolin -und Abtönfarben
differences . When buying min . 100 liters in one shade , on request , can be supplied pre- colored
material .
AmphiSilan Plus suitable for dyeing machine ColorExpress .

Matt G3

Keep in a cool, but frost-free place

Properties according to DIN EN 1062: Depending on the color can slightly change the technical
parameters of the paint:

• Maximum particle (grit) size:  <100 μm, S1
• Density:  1,5 g / cm³
• Dry layer thickness:  100-200 microns, E3
• Diffusion coefficient,
  equivalent to the thickness
  f the air layer sd H 2 O:   coefficient sd: <0.14 m (high), V1
• Water Resistant (W):  coefficient w: ≤ 0.1 [kg / (m2 · h 0.5)] (low), W3