Paint with essential benefit: Organically cross-linked nano-quartz particles form a compact, mineral-hard, three-dimensional quartz matrix structure against soiling and keep facades clean for a longer period.

The special silicone resin/binder combination provides water-repellent, highly vapour permeable paint coatings on exterior renders and mineral substrates, thus fast-drying after rainfall and when moist with dew. Also suitable for renovation of adherent silicate paints, matt dispersion/emulsion paints or synthetic renders and stable external thermal insulation composite systems (ETICS/EWI).

AmphiSilan NQG combines the advantages of approved emulsion paints and classic silicate paints. These properties make AmphiSilan NQG an ideal choice for coatings on listed buildings and lime plasters.

Low surface tension, no thermo-plasticity, non-film-forming, micro-porous. Forms a capillary active dry zone. Permeable to CO₂   Resistant to aggressive air pollutants. Contains special pigments with photocatalytic effect. Reduces visible marks on dark colours which may occur on mechanically stressed surfaces.

Combined silicone resin emulsion and new hybrid binder, on an inorganic/organic basis.

• Standard Product: 12.5 litres

• ColorExpress: 1.25 l, 2.5 l, 7.5 l and 12.5 litres

White.

AmphiSilan NQG is tintable with AmphiSilan colourants. If more than one bucket is manually tinted, all product must be thoroughly mixed before use in order to avoid colour differences.

Quantities of 100 litres or more in individual colour shades can be ordered ready-tinted ex factory. 
AmphiSilan NQG can be tinted to all current colour collections via the ColorExpress tinting & mixing machine system (in limited shades). Check tinted product before applying in order to avoid colour differences. Always use paint of same batch, when applying on seamless surfaces.

Brilliant, intensive colour shades may have a lower opacity (hiding/covering power). It is therefore advisable to apply a first coat in a similar hiding pastel tint, based on white. Possibly a second finishing coat may be necessary.

Colour Resistance as per German BFS-Merkblatt (Data Sheet) No. 26:
(Binder) Class: A
(Pigmentation) Group: 1

Matt (flat), G₃

Keep in a cool, but frost-free place.

Characteristics according to DIN EN 1062:
Tinting may cause variations.

Maximum particle (grit) size

< 100 µm, S₁

Density

Approx. 1.5 g/cm³

Dry film thickness

100 - 200 µm, E₃

Diffusion-equivalent air layer thickness s_dH₂O

(sd-value): < 0.14 m (high) V₁

Water permeability (w-value)

≤ 0.1 [kg/(m² · h^0.5)] (low) W₃

AmphiSilan-Tiefgrund
AmphiSilan-Putzfestiger
AmphiSilan-Grundierfarbe
AmphiSilan-Compact
AmphiSilan-Volltonfarben (colourants)