- www.caparol.ge
- DISBON
- Industrial
Industrial Buildings & Manufacturing & Warehouse & Logistics Centers
Up to any challenge: DISBON coatings for industrial floors. Industrial or commercial floor surfaces are exposed to the toughest loads. Synthetic resin coatings have proven themselves as universal protection and for spatial floor design. Depending on requirements, which can differ considerably from case to case, DISBON products can be precisely adjusted to specific needs.
More than clean! Walkways in production halls in the food industry must not only be kept clean, but their coating must also have an anti-slip effect. They must have mechanical (abrasion by forklift trucks, ants, employee's footwear), chemical (acids, alkalis), and thermal (extreme cold or heat) resistance of the floor and its coating. This is the DISBON case.
Most storage rooms and halls have concrete floors. Even if the requirements and building-specific requirements are very different - depending on what is stored - there is no question in almost all applications that the unfinished floor must be coated as required and professionally in order to prevent premature wear and potentially leaking liquids such as acids, oils etc. to prevent leakage into the soil and pollution of the water.
DisboFLOOR 420 E.MI PLUS
2K-EP-Grundierung
Transparent, 2-component liquid epoxy resin for priming mineral floor spaces. Emission-minimised, tested for harmful substances and supervised. Particularly suitable for moisture sensitive substrates.
- Emission-minimised.
- Tested for harmful substances.
- Approved by the German Institute for Structural Engineering.
- Free from benzyl alcohol and alkyl phenol.
- Good penetration to the substrate.
- Excellent anchorage in concrete.
- Free from substances detrimental to proper enamel wetting.
DisboPOX W 443
2K-EPGrundierung
Water-thinnable, transparent, 2-component liquid epoxy resin primer and impregnating agent for mineral flooring.
- Allows water vapour diffusion
- Suitable for matt-moist, cement-based surfaces
- Emissin-minimised, technically controlled and supervised
DisboXID 462
2K-EP-Grundierung
Transparent 2K epoxy liquid resin for priming and sealing mineral floor surfaces.
- high penetration capacity
- can be smoothed with a wing
- good chemical resistance
- can withstand continuous wet exposure
- extremely mechanically resilient
- minimized emissions
- tested against rear moisture exposure for 56 and 250 days
- free of substances that impair paint wetting
DisboPOX W 447
2K-EP-Universalharz, wässrig
Water-thinnable, 2-component liquid epoxy resin sealing for wall coatings and flooring exposed to low or medium traffic loads.
- Eurofins Indoor Air Comfort Gold certified
- Tested according to the AgBB testing criteria for VOC emissions from interior building material
- Resistant to desinfectant
- Can be decontaminated according to DIN 25415
- Water vapor permeable
DisboFLOOR 475 E.MI PLUS
2K-EP-Verlaufsbeschichtung
Emission-minimized, pigmented epoxy resin coating. Versatile for almost all floor surfaces.
- emissions minimized, (AgBB compliant & Eurofins IAC Gold certified)
- alkylphenol-free
- can be used variably as a roll coating, flow coating and scatter coating
- good chemical resistance
DisboFLOOR 475 SL
Economical, pigmented epoxy resin coating. Almost odor free.
- Almost odorless
- Can be used as a self-leveling and roller-applied coating, as well as a broadcast coating
- Good chemical resistance
- It can be used with the DisboADD 903 accelerator
- Paint compatibility
- Tested for use in the food industry
DisboADD 941
Quartz sand mixture 0,06 - 0,3 mm
DisboADD 942
Quartz sand mixture 0,1 - 0,4 mm
DisboADD 943
Quartz sand mixture 0,4 - 0,8 mm
Fire dried crystalline quartz sand.Particle size 0.4 – 0.8 mm. For covering freshly appliedprimers and coatings (sand-treatment) and for mixing intocoatings and mortars to achieve an antiskid surface.
DisboADD 944
Quartz sand mixture 0,7 - 1,2 mm
DisboADD 946
Quartz sand mixture 0,01 - 2,0 mm
Fire-dried crystalline quartz sand with a specially adjusted grading curve of 0.01 – 2 mm for the mixing of epoxy resin mortar coatings in combination with Disboxid 433 EP-Grund BF and Disboxid 462 EP-Siegel.
DisboADD 947
Glasperlen (Slidestop)
High-grade mixture of glass balls (micro grits, non-hollow).To be mixed with Disbon 405 and DisboPUR W 458/459.
DisboADD 948
Colorchips 2 - 4 mm
Plastic chips/glimmer for the individual surface design of Caparol floor coatings.
DisboADD 952
Thixotropic agent for solvent-free and low-solvent coatings. For the production of stable, trowelable coatings on vertical and inclined surfaces.
DisboADD 8255
Colorchips
Plastic chips for individual surface design of Disbon floor coverings.
